HW-6171 Automatic Blister Negative Pressure Integrated Machine
Parameters
Model |
HW-6171 |
HW-7072 |
||
Forming length |
610mm |
700mm |
||
Forming width |
250mm-710mm |
450mm-720mm |
||
Forming height |
100mm |
150mm |
||
Suitable sheet thickness |
0.25mm-2.0mm |
|||
Productivity |
About 6-12 cycles/minute |
|||
Heating oven |
Upper furnace (two sections of heating, the first section of preheating, the second section of heating) Side back |
|||
Power supply |
AC/three-phase 380V/50HZ (three-phase five-wire) |
|||
Total power |
30KW |
48KW |
||
Dimensions |
L5m×W2m×H2.6m |
L9m×W2.5m ×H2.68m |
||
Weight |
3500KG |
4500KG |
||
Machine frame |
Use the national standard 100*100 high quality square tube, welded by international advanced carbon dioxide welding machine. |
|||
Pneumatic Components |
Upper mold cylinder |
φ125*400-φ50 |
Taiwan “PUNAN” |
|
Lower mold cylinder |
φ125*350-φ50 |
Taiwan “PUNAN” |
||
Oven cylinder |
Φ63*900-standard |
Taiwan “PUNAN” |
||
Middle brake cylinder |
Φ40*300-standard |
Taiwan “CHLLD” |
||
Advantage:
This machine adopts vacuum forming, equipped with automatic punch trimming function and conveyor belt stacking (three-station optional) function.
This machine uses a hydraulic device with 60 tons cutting force, which is strong and has a long life.
The whole machine parts are made of hard chrome on the surface to prevent rust.
The heating part of the machine is fully sealed to prevent temperature difference from being caused by external factors.
This machine adopts double-tube vacuum synchronization function, and the vacuum walkway is added to make the product molding more perfect.