HW-80/105/110 series plastic extruding sheet unit

HW-80/105/110 series plastic extruding sheet unit

Main Parameters

No.

Parameters

Model

HW-80-750

HW-105-800

HW-110-800

Processing materials

PP, PS, PE

Material thickness

0.30~2.0mm

Sheet thickness accuracy

≤±0.015mm

Effective width of sheet

≤660mm

≤730mm

≤730mm

Line speed

3~20 m/min

Max.speed

120kg/h

200kg/h

250kg/h

Max.roll dia.

800mm

800mm

900mm

Layer

1

1

1

Roll specification

3-φ300-750mm

3-φ350-800mm

3-φ420×800mm

Rated power

Approx 100kw

Approx 100kw

Approx 117kw


Machine Configuration

Extruder

Stainless steel hopper.

Screw and barrel material: 38CrMoAlA nitriding treatment.

Main motor form: AC 4 (pole 30kw/4 pole 55kw/6 pole 75kw) motor, domestic inverter speed control, direct connection transmission, stable transmission and high transmission efficiency.

Reducer: extruder-specific reducer, hard tooth surface, high torque, high speed, low noise.

Filter: Double station hydraulic quick change screen.

Heater: stainless steel heating ring, solid state relay without contact output, intelligent temperature controller, PID automatic control, temperature accuracy reaches ≤ ± 1.5 °C.

Extruder technical parameters:

Extruder

Parameters

Φ80

Extruder

Φ105

Extruder

Φ110

Extruder

Motor power

30KW-4

55KW-4

75KW-6

Screw diameter(mm)

Φ80

Φ105

Φ110

Screw type

Separate Type

Screw L/D ratio

34:1

34:1

35:1

Screw maximum speed(rpm)

85

85

80

Max. output(kg/h)

120

200

250

Heating sections

5

6

6

Heating power(Kw)

Approx 25

Approx 45

Approx 50


Extrusion die

Structure: Hanger type gradient flow path, the lip gap is adjusted by pull code, and built-in stainless steel heating rod.

Material: high quality 40Cr forged steel, hard chrome plated on the runner surface, surface roughness of the runner: Ra0.025μm. Hardness of the coating: HRc≥58~62. The adjustment screw is made of Taiwan high temperature resistant screws.

Main technical parameters

Maximum effective width(mm)

750

800

800

Temperature control zone

3

3

3

Temperature control accuracy(℃)

≤±1

≤±1

≤±1

Heating power(kw)

18

18

18


Main Parameters

Press roller specifications

Φ300-750mm

Three

Φ350-800mm

Three

Φ420-800mm

Three

Roller radial comprehensive runout error

≤0.01mm

≤0.01mm

≤0.01mm

Roll surface finish

12级

12级

12级

Motor Power

3kw

4kw

4kw

Roller temperature error

≤±1℃

≤±1℃

≤±1℃

.

Auxiliary machine requirements

1. Mixer  

HW-80/105/110 series plastic extruding sheet unit                       

  2. Auto Feeder

HW-80/105/110 series plastic extruding sheet unit


3. Storage tank

HW-80/105/110 series plastic extruding sheet unit

4. Inline Crusher

HW-80/105/110 series plastic extruding sheet unit


Product consultation

Categories

Products

HW-750 PLA degradable cup lid bowl machine (YASKAWA Yaskawa s

HW-1300 HDPE plastic turnover tray thick film blister machine

HW-1000 small layout automatic PP lunch box vacuum thermoform

HW-1220 new Siemens PLC computer controlled automatic vacuum

HW-520 automatic positive and negative pressure thermoforming

HW-850 Automatic Positive and Negative Pressure Four-Station

HW-850 Automatic Positive and Negative Pressure Three-Station