Automatic negative pressure plastic thermoforming machine
Full automatic negative pressure plastic cutting machine machine Detailed Explanation | Main feature: 1. The machine adopts vacuum forming, equipped with automatic punch trimming, conveyor belt stacking (optional for three stations) 2. This machine adopts 60 tons of hydraulic equipment to cut, strong and long life 3, the machine parts are hard chromium plated surface to prevent rust 4, the local heating part of the full seal design, to prevent the temperature due to external factors, th...
Full automatic negative pressure plastic cutting machine machine Detailed Explanation |
1. The machine adopts vacuum forming, equipped with automatic punch trimming, conveyor belt stacking (optional for three stations)
2. This machine adopts 60 tons of hydraulic equipment to cut, strong and long life
3, the machine parts are hard chromium plated surface to prevent rust
4, the local heating part of the full seal design, to prevent the temperature due to external factors, the temperature difference
5, the local vacuum tank increased to 0.4m3, effectively increase the vacuum strength
6, the machine uses double-tube vacuum synchronization, increase the vacuum walkway to make the product more perfect molding
Equipment advantages (very important to pay attention):
1. This machine is based on the positive and negative pressure plastic suction machine imported from Germany. Based on the existing national conditions and plastic suction market, we make innovations based on the premise that the current quantity is small, style is high, and the mold is expensive. Completely solved the problems of the plastic manufacturers' production, production efficiency, and the use of the site.
2, the machine can use aluminum mold, electrolytic copper mold or even plaster mold production. In the original mold only need to re-type, die can be high-speed production. Reduce the need for semi-finished goods yards for punchers, packers, and ordinary machines.
3. The vacuum forming surface of the machine is moderate, the cooling is increased, and the hot air system is installed to avoid the appearance of water marks on the plane, and only the positive and negative pressure machines are used in the aspects of speed and quality.
4, the cost of the equipment and the cost of production and use are much lower than that of the positive and negative pressure machines. The equipment control originals and spare parts are all imported configurations.
The main application: Commonly used plastic materials are PVC, PET, APET, PETG, PP, PE, PS, EPS, EPOS, starch degradation materials, photoelectric degradation materials, flocking materials. Plastic products are widely used in food, hardware, electronics, stationery, medical supplies, daily necessities, cosmetic products, handicrafts, toy supplies and many other industrial products.
|Model||Specifications and origin parameters|
|Forming length||770mm（Pull direction）|
|Forming width||410mm-610mm （With automatic telescopic chassis 450-610MM adjustable）|
|Forming height||150mm(Die punching120mm，Under molding80mm）|
|Hot stove mode||Electric furnace|
|using electric||380V Three-phase four-wire 50HZ|
|Overall size||L9000 mm*W1700 mm *H2680 mm（Based on actual parameters）|
|Total Weight||4500KG（Based on actual parameters）
Automatic Negative Pressure Machine (AC Contactor)
Negative pressure integrated plastic molding machine (intermediate relay)
Blister vacuum molding machine (servo motor driver)
Negative pressure molding machine (temperature control module)
Automatic vacuum molding machine (PLC controller)
Automatic negative pressure molding machine (upper and lower heating bricks)