HW-730PET Cold Drink Cup/Self-Hot Pot Thermoforming Machine

HW-730PET Cold Drink Cup/Self-Hot Pot Thermoforming Machine

Technical Parameters

Model

HW-680

HW-730

HW-750

HW-850

Suitable material

PP、PS、PET、PVC、ABS、PLA(biodegradable material) etc

Sheet thickness

0.3-2.0mm

Sheet width

680mm

730mm

750mm

850mm

Max. forming area

680*350mm

730*420mm

750*500mm

850*560mm

Max. forming depth

≤140mm

≤180mm

≤180mm

≤180mm

Capacity

≤30shots/minute

Heating power

70kw

100kw

110kw

137.2kw

Main motor power

7.5kw

11kw

15kw

15kw

Sheet feeding power

2.2kw

3kw

4kw

4kw

Power supply

380V/50HZ

Air pressure

0.6-0.8Mpa

Air consumption

3200~4000 L/min

4000~5000 L/min

4500~6000 L/min

6000~8000 L/min

Water consumption

40-45L/min

40-50L/min

40-60L/min

60-80L/min

Dimensions(mm)

3500*1600*2300

3950*1600*2300

4300*1600*2300

4500*1650*2300

Weight

4500kg

5500kg

6000kg

6200kg

 

Features

1.The main machine is a 4-lead column structure, the guide column material is made of 40Cr steel, and the outer layer is hard chrome-plated. The rigidity is good, the guiding performance is accurate, the wear resistance is good, and the service life of the die is cut. The die table opening and closing adopts hydraulic five-point opening. Clamping, high clamping accuracy.

2.Hydraulic system uses domestic oil pump, Taiwan imported solenoid valve.

3.Heater (upper furnace) length 2250/2500/2750/3200mm, (lower furnace) 1750/2250/2500/2950mm is divided into 7/16/18 area PID automatic temperature control adjustment, single-phase voltage regulator module without contact output, stable, high precision, temperature control error <±1°C . In the upper and lower 8 zones, the electric furnace mouth is moved forward in the direction of the mold to realize a seamless connection between the mold and the electric furnace. The upper part of the electric furnace and the mold connection can be adjusted to reduce the temperature difference between the front and rear of the product.

4.The heater adopts clay arc electric heating tile, which has high heat effect, energy saving, safety and reliability.

5.The feeding chain adopts a toothed double-row roller chain. The cooling water path inside the chain rail has high cooling efficiency and saves water source. The inner cover stainless steel plate and the guide rail are made of 40Cr quenching, the working surface has high hardness and long service life. The use time is 20,000 hours.

6.Low center of gravity design, low cup height, smooth running, in line with the human body standing and observation of the best height.

7.The gas control of the whole equipment (cylinder is domestic famous brand----Fangda) adopts Japanese and Taiwanese components, and the action is reliable, which makes the lifespan long.

8.The feeding power adopts frequency conversion motor and hard tooth surface Taiwan brand speed reducer, with high control precision, accurate positioning and quick start and stop response.

9.Using Omron PLC.EV touch screen man-machine interface, the operation is more convenient.

10.The back end is equipped with a corner winding mechanism, the maximum winding diameter is 1000mmm, and the roll change is convenient.


Main Specifications

1.Feeding sheet length deviation ≤ ±1.5mm;

2.The heating electric furnace adopts clay arc electric heating tile with temperature deviation <±1°C;

3.Dynamic table level error ≤0.3mm(-)/1000mm;

4.The parallelism error between the movable table and the upper die table is ≤0.03mm/1000 mm;

5.The vertical error between the column and the movable table is ≤0.04mm;

6.The bearing of the column and the movable die table is matched with a clearance of +0.02mm ~ +0.04mm.

7.The maximum punching force is 45 tons.


HW-730PET Cold Drink Cup/Self-Hot Pot Thermoforming MachineHW-730PET Cold Drink Cup/Self-Hot Pot Thermoforming MachineHW-730PET Cold Drink Cup/Self-Hot Pot Thermoforming MachineHW-730PET Cold Drink Cup/Self-Hot Pot Thermoforming Machine

Product consultation

Categories

Products

HW-1300 HDPE plastic turnover tray thick film blister machine

HW-1000 small layout automatic PP lunch box vacuum thermoform

HW-1220 new Siemens PLC computer controlled automatic vacuum

HW-710 automatic positive and negative pressure thermoforming

HW-850 Automatic Positive and Negative Pressure Four-Station

HW-850 Automatic Positive and Negative Pressure Three-Station